Steel Strap SealsSaveAsPDF

open sealclosed-sealpush type seal
Open Seals (Snap-on)

Placed over the overlapping strapping ends either during or after tensioning the strapping. Eliminates pre-threading. Speeds the strapping operation.		Closed Seals (Sleeve)

Must be threaded over the overlapping strap ends before the tensioning tool is applied. Generally used on bales, bundles, and larger sizes of strap.		Push-type Seals (Overlap)

Used where strap is tensioned by putting the nose of the tensioner against the seal. Overlapping ends withstand the higher stress.
Stock #Size/TypeSeal TypeSeal DimensionsQuantityWT/ per 1M
SO-13/8'' Regular DutyOpen1 x 0.02050005#
SC-1Closed1 x 0.02050005#
SP-1Push0.875 x 0.02350007#
SO-21/2'' Regular DutyOpen1 x 0.02050006#
SC-2Closed1 x 0.02050007#
SP-2Closed1 x 0.02050009#
SO-55/8'' Regular DutyOpen1 x 0.02050007#
SC-5Closed1 x 0.02050007#
SP-5Push0.875 x 0.023500010#
SO-73/4'' Regular DutyOpen1 x 0.02050008#
SC-7Closed1 x 0.02050008#
SP-7Push0.875 x 0.023500012#
SO-7HD3/4'' Heavy DutyOpen1.87 x 0.035200028#
SC-7HDClosed1.87 x 0.035200031#
SP-7HDPush1.87 x 0.035200031#
SP-7HDLPush2.2 x 0.035150036#
SO-1251 1/4'' Heavy DutyOpen2.187 x 0.031100046#
SC-125Closed2.2 x 0.035100046#
SP-125Push2.2 x 0.035100068#
SC-2002'' Heavy DutyClosed3 x 0.05050050#
TOP